Continuous consolidation
Multi-ply prepreg is continuously fed, heated, compacted and cooled to manufacture flat laminate. CARO has actual production experience with laminate for buoys.
MANUFACTURING TECHNOLOGY
From multilayer prepreg to structural laminate through continuous heating, compression and cooling.
Multi-ply prepreg is continuously fed, heated, compacted and cooled to manufacture flat laminate. CARO has actual production experience with laminate for buoys.
CONTINUOUS PROCESS
From multi-ply prepreg rolls to consolidated structural laminate, material feeding, heating, compression, cooling and cutting form a continuous workflow.
Prepreg rolls continuously feed the multi-ply layup into the heating and consolidation process.
IR preheating prepares the layup for heated consolidation. Conditions are set according to material, thickness and feed requirements.
Already polymerized thermoplastic prepreg is heated and compressed to consolidate the multi-ply structure. This stage uses thermoplastic consolidation rather than waiting for resin cure.
The consolidated material is cooled to produce laminate. Cooling conditions are reviewed against thickness and feed requirements.
Continuous feeding connects heating, consolidation, cooling and cutting. Feed conditions are reviewed together with heating and cooling requirements.
Laminate is automatically cut to the customer-specified length. Separate narrower-width cutting can be considered for the supply specification.
The diagram shows the functional flow based on the equipment configuration. Continuous feeding connects the process stages.
1,000 mm width, multi-ply roll feeding, IR preheating, continuous compression, heating/cooling, feeding and automatic cutting.
Cut-to-length supply is supported. Thickness and layup conditions are reviewed together with the material and equipment constraints.
CCM LAMINATE SPECIFICATIONS
| Item | Specification / confirmation status |
|---|---|
| Manufacturing width | 1,000 mm |
| Normal thickness range | 0.2–3.0 mm · subject to specification and process review |
| Supply length | Customer-specified set length → automatic cutting |
| Narrow-width supply | Narrower-width cutting available when required |
| Custom thick sheets | 15 mm, 20 mm and other thick sheets: separate heated press consolidation, outside the continuous CCM specification |