CARO · COMPOSITE & ROBOTICS한국어

MANUFACTURING TECHNOLOGY

Continuous Compression Molding

From multilayer prepreg to structural laminate through continuous heating, compression and cooling.

Continuous consolidation

Multi-ply prepreg is continuously fed, heated, compacted and cooled to manufacture flat laminate. CARO has actual production experience with laminate for buoys.

CONTINUOUS PROCESS

CCM manufacturing process

From multi-ply prepreg rolls to consolidated structural laminate, material feeding, heating, compression, cooling and cutting form a continuous workflow.

  1. 01Multi-ply roll feeding
  2. 02IR preheatingIR preheating
  3. 03Heating & continuous consolidationHeating + compression
  4. 04CoolingCooling
  5. 05Continuous feedingFeeding
  6. 06Set length & automatic cuttingAutomatic cutting

Features of each process stage

01

Multi-ply roll feeding

Prepreg rolls continuously feed the multi-ply layup into the heating and consolidation process.

02

IR preheating

IR preheating prepares the layup for heated consolidation. Conditions are set according to material, thickness and feed requirements.

03

Heating & continuous consolidation

Already polymerized thermoplastic prepreg is heated and compressed to consolidate the multi-ply structure. This stage uses thermoplastic consolidation rather than waiting for resin cure.

04

Cooling

The consolidated material is cooled to produce laminate. Cooling conditions are reviewed against thickness and feed requirements.

05

Continuous feeding

Continuous feeding connects heating, consolidation, cooling and cutting. Feed conditions are reviewed together with heating and cooling requirements.

06

Set length & automatic cutting

Laminate is automatically cut to the customer-specified length. Separate narrower-width cutting can be considered for the supply specification.

The diagram shows the functional flow based on the equipment configuration. Continuous feeding connects the process stages.

System configuration

1,000 mm width, multi-ply roll feeding, IR preheating, continuous compression, heating/cooling, feeding and automatic cutting.

Supply integration

Cut-to-length supply is supported. Thickness and layup conditions are reviewed together with the material and equipment constraints.

CCM LAMINATE SPECIFICATIONS

CCM laminate production & supply specifications

ItemSpecification / confirmation status
Manufacturing width1,000 mm
Normal thickness range0.2–3.0 mm · subject to specification and process review
Supply lengthCustomer-specified set length → automatic cutting
Narrow-width supplyNarrower-width cutting available when required
Custom thick sheets15 mm, 20 mm and other thick sheets: separate heated press consolidation, outside the continuous CCM specification
Prototype Development →