| Storage and expiry | Fully polymerized solid prepreg requires no refrigerated or frozen storage and has no expiry caused by the progress of uncured-resin curing. | Uncured prepreg requires resin-specific shelf/out-life management and may require cold storage. The same uncured-resin expiry concept does not apply to fully cured laminate. |
|---|
| Subsequent forming principle | Already polymerized material is heated, consolidated/formed and cooled, without waiting for a separate resin cure at this stage. | Prepreg layup requires chemical resin curing; post-curing may be included depending on the system. |
|---|
| Processing time | Eliminating the cure wait in subsequent forming supports shorter cycle design. Actual time depends on thickness, heating and cooling. | Cure time and sometimes post-cure time are required. Rapid-curing thermoset systems also exist; comparisons must be process-specific. |
|---|
| Continuous production and scalability | Roll-prepreg feeding, continuous CCM laminate manufacture, automatic cutting and press automation support repeatable production. | Cure conditions and material out-life must be incorporated into planning. Thermosets can also support automated, continuous and high-volume processes. |
|---|
| Inventory and handling | Avoids cold-storage and thawing requirements; tack-free handling supports storage, feeding and layup. | Prepreg may require cold-chain logistics, thawing and out-time tracking. Cured laminate follows separate handling requirements. |
|---|
| Thick laminates | No cure exotherm must be controlled during heated consolidation. Thick sheets are reviewed in a separate press for heat transfer, pressure and cooling. | Cure exotherm and heat transfer inform the cure schedule. Thick sheets are possible, with appropriate process control. |
|---|
| Changes after forming | Reheating and reforming can be considered under material- and structure-appropriate conditions. | Cured resin is difficult to reform through reheating in the manner of a thermoplastic. |
|---|
| Recycling | Thermoplastic behavior supports consideration of reprocessing and recycling routes. | The cured crosslinked matrix does not readily remelt; separate recycling routes are required. |
|---|